|
Loopback Addresses:
R1: 172.17.0.1 255.255.255.255
R2: 172.17.0.2 255.255.255.255
R3: 172.17.0.3 255.255.255.255
R1: 2001:db8:0:172::1/128
R2: 2001:db8:0:172::2/128
R3: 2001:db8:0:172::3/128
Network Addresses from Network
192.168.100.0 255.255.255.0
2001:db8:0::/48
R1 Serial 1/0 192.168.100.1/30
R2 Serial 1/0 192.168.100.2/30
R2 Serial 1/1 192.168.100.5/30
R3 Serial 1/1 192.168.100.6/30
R1 Serial 1/0 2001:db8:0:1::1/64
R2 Serial 1/0 2001:db8:0:1::2/64
R2 Serial 1/1 2001:db8:0:2::1/64
R3 Serial 1/1 2001:db8:0:2::2/64
The lab uses the Cisco 7200 routers. If you want to use other routers the configuration should
work also. Please make sure you have the same interfaces in your simulated router.
The lab has three routers connected via the serial interfaces S1/0 and S1/1. Each router has a loopback address configured. You can ping the three routers. The telnet password is "network", the enable secret is "routing".
|
