|
Loopback Addresses:
R1 172.17.0.1 255.255.255.255
R2 172.17.0.2 255.255.255.255
R1 2001:db8:0:172::1/128
R2 2001:db8:0:172::2/128
Network Addresses from Network
192.168.100.0 255.255.255.0
2001:db8:0:1::/64
R1 Serial 1/0 192.168.100.1/30
R2 Serial 1/0 192.168.100.2/30
R1 Serial 1/0 2001:db8:0:1::1/64
R2 Serial 1/0 2001:db8:0:1::2/64
The lab uses the cisco 7200 routers. If you want to use other routers the configuration should
work also. Please make sure you have the same interfaces in your simulated router.
The lab has two routers connected via the serial interface S1/0. Each router has a loopback address
configured. You can ping the two routers.
The lab is now prestaged for IPv4 and IPv6. You can get pure IPv4 or IPv6 configurations, or a vesion with both protocols configured.
|
