|
Loopback Addresses:
R1 172.17.0.1 255.255.255.255
R2 172.17.0.2 255.255.255.255
R3 172.17.0.3 255.255.255.255
Network Addresses from Network
192.168.100.0 255.255.255.0
R1 Serial 1/0.2 192.168.100.1/30
R2 Serial 1/0.1 192.168.100.2/30
R1 Serial 1/0.3 192.168.100.5/30
R3 Serial 1/0.1 192.168.100.6/30
The lab uses the Cisco 7200 routers. If you want to use other routers the configuration should
work also. Please make sure you have the same interfaces in your simulated router.
The lab has three routers connected via the serial interfaces S1/0. On Router 1 both Frame Relay
connections are on interface serial 1/0 using subinterfaces. The DLCIs are shown in the diagram.
The telnet password is "network", the enable secret is "routing".
Network File 3 Routers Frame Relay Point to Point
Configuration basic Frame Relay: R1 R2 R3
| 
