|
Loopback Addresses:
R1 172.17.0.1 255.255.255.255
R2 172.17.0.2 255.255.255.255
SW1 172.17.0.10 255.255.255.255
SW2 172.17.0.11 255.255.255.255
Network Addresses from Network
192.168.100.0 255.255.255.0
R1 Fastethernet 0/0 192.168.100.1/24
R2 Fastethernet 0/0 192.168.100.2/24
The lab uses the Cisco 3725 routers. If you want to use other routers the configuration should
work also. Please make sure you have the same interfaces in your simulated router. You need an
NM-16ESW module in your switch, so not all models are supported.
The lab has two routers connected via the Fastethernet Interface FE0/0 to switch 1 and to switch 2.
Each router has a loopback address
configured. You can ping the two routers.
Network File 2-Routers Fast Ethernet + two Switches
Configuration:
R1
R2
SW1
SW2
The VLAN Database of the two switches must be configured with VLAN 100.
|
