|
Loopback Addresses:
R1 172.17.0.1 255.255.255.255
R2 172.17.0.2 255.255.255.255
R3 172.17.0.3 255.255.255.255
R1: 2001:db8:0:172::1/128
R2: 2001:db8:0:172::2/128
R3: 2001:db8:0:172::3/128
Network Addresses from Network
192.168.100.0 255.255.255.0
R1 Fastethernet 0/0 192.168.100.1/30
R2 Fastethernet 0/0 192.168.100.2/30
R2 Fastethernet 0/1 192.168.100.5/30
R3 Fastethernet 0/1 192.168.100.6/30
R1 Fastethernet 0/0 2001:db8:0:1::1/64
R2 Fastethernet 0/0 2001:db8:0:1::2/64
R2 Fastethernet 0/1 2001:db8:0:2::1/64
R3 Fastethernet 0/1 2001:db8:0:2::2/64
The lab uses the Cisco 3725 routers. If you want to use other routers the configuration should
work also. Please make sure you have the same interfaces in your simulated router.
The lab has three routers connected via the Fastethernet Interface FE0/0 and FE0/1. Each router has a loopback address
configured. You can ping the three routers. The telnet password is "network", the enable secret is "routing".
Network File 3-Routers Fast Ethernet Cisco 3725
| Configuration IPv4 |
R1
R2
R3
|
| Configuration IPv4 - IPv6 |
R1
R2
R3
|
| Configuration IPv6 |
R1
R2
R3
|
| Configuration NAT Basic |
R1
R2
R3
|
| Configuration NAT Interface |
R1
R2
R3
|
| Configuration NAT Pool |
R1
R2
R3
|
| OSPFv2 IPv4 Area 0 |
R1
R2
R3
|
| OSPFv2 IPv4 2 Area |
R1
R2
R3
|
|
